Infrared Asphalt Maintenance Vehicles

Overview

The HDE asphalt maintenance vehicle is a turnkey infrared asphalt repair machine that will heat up and soften a localized area of the surface course asphalt, allowing for the area to be re-worked and compacted fixing any surface deterioration. HDE’s highly efficient infrared heaters can soften the surface course ( up to 2.5″) of asphalt to the original mixing temperatures in 5 to 10 minutes without burning the asphalt. The asphalt can then be scarified and the rerolled to form a seamless watertight repair.

Potholes, surface cracks, bad joints, bird baths, catch basins, and manholes can be economically repaired with minimal time expended and minor traffic re-routing throughout the year. The HDE asphalt heaters have also proven well for pre-heating of the asphalt for cold weather paving.

HDE infrared trucks provide unique features that you will not find in any other infrared heater on the market.

The HDE Asphalt Reclaimer is capable of both maintaining the temperature of virgin asphalt and reheating cold material to workable temperature. The HDE Asphalt Reclaimer can be used 365 days a year whether it is using material from the local asphalt plant or recycling left- over material to create a hot patching material in the middle of the winter. Reheating left over materials eliminates the need of disposal and can drastically reduce the amount of cold patch material needed to repair problem areas. The reheating process can take 8-12 hours depending on the ambient temperatures and the amount of asphalt that is being heated. By using a digital temperature controller we are able to heat the asphalt safely until it has reached the desired temperature. The controller prevents any burning of the asphalt by turning the heaters of at a pre-set temperature (i.e. 300 degrees F).

OPERATION

The HDE system allows the operator to heat for a period of 10 minutes. The first five minutes runs on high mode (35 PSI ) and allows the infrared rays to penetrate through the surface of the asphalt. The next five minutes can be run on low mode (15 -20 PSI), allowing deeper penetration by conduction while maintaining an even heat on the surface without burning the oils in the asphalt. (Competitors units operate on one pressure, preventing the operator to turn the heat down ) This allows the operator to reduce fuel usage throughout the day.

FEATURES ONLY AVAILABLE ON HDE HEATERS:

LARGEST HEATER DECK ON THE MARKET (INCREASED PRODUCTION)

INCREASED PATCH SIZE ( FOOTPRINT ) COMPARED TO COMPETING MODEL

STAINLESS STEEL HEATER SKIRTS

FULLY ADJUSTABLE HEAT FOR VARIOUS JOB CONDITIONS

HEIGHT ADJUSTABLE HEATER DECK FOR VARIOUS JOB CONDITIONS

LIQUID PROPANE TO ELIMINATE TANK FREEZE UP AND DECREASES FUEL USAGE

UP TO 10 INDEPENDENT HEAT ZONES TO CONTROL THE SIZE OF YOUR PATCH

NO BLOWERS

The HDE heaters run on the natural vapor pressure from the vaporizer, getting the correct air/gas ratio without using blowers and batteries, so the operation is simpler and more economical than other designs. The HDE design uses a Venturi design to uses air from the atmosphere to mix with the propane gas. This creates the ideal mixture of propane and air to burn at the correct temperature to create an Infrared Heat Wave. This is confirmed with the picture below showing the IR heater with a output of 1046 Degrees C. This create a IR heat wave that will penetrate into the entire surface course of the asphalt.

MAINTENANCE AND PARTS

All of HDE’s equipment is built with standard gas components, available at gas suppliers throughout North America, if we are unable to meet your delivery requirements. HDE stocks replacement parts and do recommend consulting us prior to making other purchases. Most customers can receive parts within 2 days for US orders and next day for Canadian orders.

FEATURES
⌵ PATENTED CARTRIDGE SYSTEM

HDE's replaceable ceramic cartridge allows for easy replacement of the heating element. Typical cartridge life is about 1,500 hours, and can be changed in less than 20 minutes. This patented design prevents the heat from transferring to the heater plenum (top), thus extending the life of the heater.

⌵ ADJUSTABLE TEMPERATURE

HDE's heaters are capable of running at pressures of 5 PSI up to 40 PSI. HDE's unique High/Low system allows the operator to heat the patch with a higher temperature for the first 5 minutes, followed by 5 minutes of low heat. This enables the operator to reduce the fuel usage while the heat is penetrating deeper into the already heated patch.

⌵ PROPANE VAPORIZER

The C.G.A. approved vaporizer converts liquid propane to vapour gas. Unlike conventional vapour heating systems, our liquid system will not freeze, and can operate on one propane tank at a time, at temperatures of -15°F (-25°C). Operating on liquid propane allows the truck to carry fewer tanks, and allows you to empty a tank completely.

An HDE 750 with a heating panel size of 8' x 6.6' heater will operate on two to three 100 pound propane tanks per day with out any freezing of the cylinders.

This eliminates the need to have a Transportation of Dangerous goods certificate or HAZMAT endorsement for CDL drivers.

⌵ RECLAIMER

The HDE hotbox reclaimer will maintain proper working temperature of the asphalt for up to 48 hours. The hopper is heated by two 25,000 BTU infrared heaters. A digital PLC temperature controller monitors the hopper and powers the ignition system as required to keep the material pliable. The automatic spark ignition has a built in safety that will automatically shut off the gas if the flame does out. The temperature is monitored by the onboard PLC that will monitor the temperature throughout the day and night. A built in timer can turn the reclaimer on at a preset time.

⌵ FULL HYDRAULICS

The heater deck raises and lowers hydraulically by two 4" cylinders that are controlled from either side of the truck. A built in safety (Velocity Fuse) allows for the heater deck to lower slowly in case of a hose rupture.

⌵ HYDRAULIC WASTE BINS

The underslung hydraulic waste bin utilizes the space under the hot box, allowing for more valuable deck space for roller storage and tool storage. The bin is available in two sizes: 24 cubic inches and 45 cubic inches. It is available on one or both sides of the truck.

⌵ HYDRAULIC ASPHALT ROLLER LIFTS

The HDE roller lift (patent pending) is designed to lift any type of single drum asphalt roller or plate tamper effortlessly from the ground and place it on the deck of the truck. The unit is hydraulically powered, and is controlled by a single push-button located beside the lift. A 25 gallon water tank allows enough water for a days operation, and can be filled from either side of the truck.

⌵ TOOL RACKS

Built-in tool racks hold up to 14 essential patching tools, including rakes, shovels, scrapers, asphalt lutes and rejuvenator sprayers. An optional built-in rejuvenator tank can hold up to 25 gallons of product.

⌵ PROPANE CYLINDER

All HDE patcher vehicles are fuelled by liquid draw propane cylinders. There are standard propane cylinders that will draw liquid off of the top, converting it into vapour gas through the vaporizer. Using liquid tanks eliminates the need to carry extra propane tanks. Photographed above are two 200 pound LPG tanks. These will provide up to two days of operating, depending on the pressure that the heaters are operating at.

⌵ EXTENDABLE HEATING PANEL

The standard HDE patcher vehicle is an HDE 750 with a heating area of 8' x 6.6' ( 52. Square Feet ) Each IR heater can be operated individually to allow for various heating patterns. 2 other models are available to allow for more heating zones. The HDE 1050 with a 12' x 6.6' heating panel ( 72 Square Feet ) and 14 heat zones and the HDE 1050 with a 15' x 6.6' heating panel ( 99 Square feet ) and 18 heat zones.

⌵ QUICK ATTACHMENT

The HDE heating deck is built with a quick attachment system, allowing the heating unit to be removed from the truck in under ten minutes.

⌵ MEDIA

Media coming soon!

⌵ HYDRAULIC SYSTEM

Hydraulic System | content coming soon.

⌵ OPTIONS

Options | content coming soon.

⌵ FUEL USAGE

Fuel Usage | content coming soon.

Available Vehicles

P750 2TMV

P1050 2TMV

P1350 4TMV

Contact Us

Please Leave your Information Below