top of page
Orange-Recycle-for-Banner.png

ASPHALT STORAGE

ASPHALT RECLAIMERS

(TRAILER MOUNTED)
OVERVIEW
3THBRT-D-CUTOUT.png

The HDE hot box reclaimer will maintain proper working temperature of the asphalt for up to 48 hours. The hopper is heated by two 25,000 BTU infrared heaters. The temperature of the hopper is monitored by a 24 volt digital temperature controller that will turn the power the ignition systems as it calls for heat. The automatic spark ignition has a built in safety that will shut the gas off if the flame goes out.

 

The HDE infrared heaters allow for uniform heat without overheating the asphalt. Ventilation in the box allows the hot air to move evenly around the box. Vents inside the hopper allow hot air from the heating chamber to heat the top portion of the hopper.


The dual hopper allows for better heat distribution when being used as a hot box and assists in the reclaiming of cold asphalt.

 

The loading doors open to form a chute for easy loading of virgin hot mix at the plant of chunks of cold asphalt for reclaiming. Unloading doors lock in the up position to prevent accidental closing during the unloading. The sloped dual hopper allows easy removal of hot mix.

The HDE Asphalt Hot Box Reclaimer is capable of both maintaining the temperature of virgin asphalt and reheating cold material to workable temperature. The HDE Asphalt Hot Box Reclaimer can be used 365 days a year whether it is using material from the local asphalt plant or recycling left- over material to create a hot patching material in the middle of the winter. Reheating left over materials eliminates the need of disposal and can drastically reduce the amount of cold patch material needed to repair problem areas. The reheating process can take 8-12 hours depending on the ambient temperatures and the amount of asphalt that is being heated. By using a digital temperature controller we are able to heat the asphalt safely until it has reached the desired temperature. The controller prevents any burning of the asphalt by turning the heaters of at a preset temperature (i.e. 300°F ).

DSC_3111.jpg
Available Models
HBR_2THBR-TD-2019-CUTOUT-DUMPING.png

2THBR-T (D)

3THBRT-D-CUTOUT.png

3THBR-T (D)

HBR_4THBR-TD-2019-CUTOUT-SIDE-VIEW.png

4THBR-TD

FEATURES
Infrared%20Heater%20half_edited.jpg
Cartridge-Cutout_edited.jpg

PATENTED CARTRIDGE SYSTEM

  • HDE's replaceable ceramic cartridge allows for easy replacement of the heating element.

  • Typical cartridge life is about 1,500 hours, and can be changed in less than 20 minutes.

  • This patented design prevents the heat from transferring to the heater plenum (top), thus extending the life of the heater.

ASPHALT RECLAIMERS

(TRUCK & SKID MOUNTED)
OVERVIEW

The HDE Asphalt Hotbox Reclaimer side chute model is designed to be mounted on a truck deck. Out Hotbox reclaimers are capable of both maintaining the temperature of virgin asphalt and re-heating cold material to workable temperatures. The HDE asphalt hotbox reclaimer can be used 365 days a year whether it is using material from the local asphalt plant or recycling left-over material to create hot patching material in the middle of winter. Re-heating left over material eliminates the need of disposal and can drastically reduce the amount of cold patch material needed to repair problem areas. The re-heating process can take 8-12 hours depending on the ambient temperatures and the amount of asphalt that is being heated. By the use of a digital temperature controller you are able to heat the asphalt safely until it is pliable and workable. The controller prevents any burning of the asphalt by turning the heaters of at a pre-set temperature (e.g. 300 °F.).

2THBR-SM-CUT-OUT-2017.png
20170405_093040.jpg

The HDE hotbox reclaimer will maintain proper working temperature of the asphalt for up to 48 hours. The hopper is heated by two infrared heaters. A PLC (programmable logic controller) monitors the hopper temperature and powers the hotbox to maintain the pre-set temperature. The automatic spark ignition has a built in safety that will automatically shut the gas off if there is a failure in ignition. The HDE infrared heaters allow for uniform heat without overheating the asphalt. Ventilation in the box allows the hot air to move evenly around the box while vents inside the hopper allow hot air from the heating chamber to heat the top portion of the asphalt in the hopper. The dual hopper allows for better heat distribution when being used as a hotbox and assists in the reclaiming of cold asphalt. The loading doors open to form a chute for easy loading of virgin hot mix at the plant. Unloading doors automatically lock in the up position to prevent accidental closing while removing the asphalt as well the sloped dual hoppers aid in removal of the hot mix.

The heat is fueled by one or more 100 pound vapor drawn LPG tank with a quick fill multi-valve. This eliminates the need to switch tanks and allows the operator to fill up at any propane depot. Our hotbox reclaimers can operate for up to 3 days before requiring a re-fill of propane (dependent on hotbox size).

20170419_142838.jpg
Available Models
2THBR-SM-CUT-OUT-2017.png

2THBR-SM (TM)

2THBR-SM-CUT-OUT-2017.png

3THBR-SM (TM)

2THBR-SM-CUT-OUT-2017.png

4THBR-SM (TM)

FEATURES
Infrared%20Heater%20half_edited.jpg
Cartridge-Cutout_edited.jpg

PATENTED CARTRIDGE SYSTEM

  • HDE's replaceable ceramic cartridge allows for easy replacement of the heating element.

  • Typical cartridge life is about 1,500 hours, and can be changed in less than 20 minutes.

  • This patented design prevents the heat from transferring to the heater plenum (top), thus extending the life of the heater.

TRUCK STORAGE & AUGERS

Auger-cutout.png
Features:
  • The reversible rotary conveyor is driven by a hydraulic motor and supported by heavy-duty ball bearings.

  • A mix/anti-bridging device features separate hydraulic drive and controls.

  • The wear parts, including auger and trough, are easily replaceable.

  • Reversible auger feeds patch mix to work area to eliminate costly dump beds and hoists.

The reversible rotary conveyor is driven by a hydraulic motor and supported by heavy-duty ball bearings. A mix/anti-bridging device features separate hydraulic drive and controls. The wear parts, including auger and trough, are easily replaceable. Reversible auger feeds patch mix to work area to eliminate costly dump beds and hoists.

HBV-15-ton-truck-unit-cut-out.png
OVERVIEW