MINI ASPHALT HEATERS

Overview

HDE’s asphalt heaters will heat up and soften a localized area of the surface course of asphalt so that it can be re-worked and re-compacted to eliminate surface deterioration. The highly efficient infrared heaters can soften asphalt to original mixing temperatures in 5 to 10 minutes, making repair of an asphalt surface effective and economical. Potholes, surface cracks, bad joints, bird baths, catch basins, and manholes can be economically repaired with minimal time expended and minor traffic re-routing.

All HDE Mini Heaters operate on vapour propane. The patented design allows achievement of highly efficient infrared heat without the use of any blowers or batteries.The entire surface of the heater is infrared with no open flame, which can cause damage to the asphalt properties. The heater works under varying pressures from 5 to 50 psi, giving a wide range of heat intensity with no chance blow-out in high winds. The HDE heater has one of lowest operating costs on the market. A typical heater can cost as low as $ 1.50 per hour to operate.

HDE’s Mini Heaters have been used in the field for over 10 years for many of the following applications:

    • Alligator Cracks

    • Catch Basins

    • Decorative Asphalt

    • Weed Killing

    • Frost Removal

    • Tennis Court Repairs

    • Parking Deck Repairs

FEATURES

PATENTED CARTRIDGE SYSTEM

HDE's replaceable ceramic cartridge allows for easy replacement of the heating element. Typical cartridge life is about 1,500 hours, and can be changed in less than 20 minutes. This patented design prevents the heat from transferring to the heater plenum (top), thus extending the life of the heater.

ADJUSTABLE TEMPERATURE

Adjust each heater individually to allow for various heat zones. C.S.A. approved valves. C.S.A. approved type III propane hose.

PROPANE CYLINDER

Our mini infrared heaters operate on one to two 30 to 40LB LPG vapor cylinder(s). They are secured by a 2" heavy duty nylon strap.

CASTERS

Heavy duty casters that can rotate from the front to the side of the machine to maneuver around objects. Two wheels are equipped with roll-lock break kit (R2D2 not applicable)

VALVES AND FITTING

Adjust each heater individually to allow for various heat zones. C.S.A. approved valves. C.S.A. approved type III propane hose.

BROCHURE
SPECIFICATION